Solidigm

JGira3 · 08-16-2012

Hello,I've read in a number of places (links posted below) that TRIM support has recently been made available for SSDs being run in a RAID 0 configuration while using the latest Intel Rapid Storage tech drivers. Will the Intel SSD Toolbox software b...

JGira3 · 11-28-2012

I'd probably email your report to intel https://supportmail.intel.com/Welcome.aspx here under software products / chipset software / IRST. I did so with my own issue. Perhaps enough error reports can help them nail down the issue or at least make the...

JGira3 · 11-27-2012

I'm getting pretty much the same error with 11.6. Using an Asus Z77 ( P8Z77-V DELUXE w/ 3770k) with Windows 7 64 Pro. I also had the same trouble with 11.5. When I system restored back to 11.2.0.1006 all was good again. Drive setup as follows:Two In...

JGira3 · 09-24-2012

Run a full diagnostic scan (did it twice for each drive and 1 drive didn't pass the first time, but they both passed 100% the second time). That right there is probably a bad sign. Just because it passed a second time doesn't necessarily mean the dr...

JGira3 · 09-02-2012

A couple other random thoughts occured to me:What sata port on the X58 are you using? Is it the Marvell based 6gb/s port? Just out of curiosity, what happens if you move the drive to an Intel based 3gb/s port? I'm asking because a while back I read a...

JGira3 · 09-02-2012

Well, assuming you went with a clean install, have gone through the toolbox system tuner, and are certain all hardware cable connections are snug (sounds overly simple, but sometimes it's the easy stuff that bites us), I'm thinking potentially a bad ...

Solidigm

User Statistics

User Activity

SSD Toolbox, Raid 0, TRIM

Re: IRST 11.6 is bugged!

Re: IRST 11.6 is bugged!

Re: Trouble with 2 x Intel 520 (180GB) RAID0

Re: Stability Issues with Intel SSD 520 after X25m Upgrade

Re: Stability Issues with Intel SSD 520 after X25m Upgrade