Hello, Too bad you removed the small gap in the "D5-P5430 U.2" shell allowing air to pass between the SSD shell and the PCIe card to cool the SSD. If you look at the D5-P5316 U.2, air passes...
Hello, I'm really interested in purchasing the P44 Pro 2TB NVMe drive but wanted to check first if the controller supports both 512 and 4Kn lba sector sizes and that I am able to convert between the...
While installing Windows10 onto my SSDPEKNUV512 M.2 SSD I created the partitions incorrectly. I was trying to install both Windows10 AND Debial Linux onto the same SSD- I made the partitions in...
Hi, I'm running 72 DC s4520 drives with firmware 7CV10100 and I want to update these to 7CV10111. The SST tool display that firmare is available but when applying the update an erro...
Hello there,
I recently got a P3600 1.6TB. I looked it up, and the warranty page says it expires in December later this year, but my firmware is not getting updated to the latest version available....
Afternoon All,
I have an Intel SSD Pro 7600p NVMe that I need to clean, I have tried using the Intel SSD Toolbox but that states the 7600p is no longer supported. So I tried the Solidigm Storage T...
Trying to install Solidigm Storage Tool 1.1 on a (very) old laptop (Sony Vaio VGN-SZ370P) where the hard disk has been replaced with an (also old) Intel X-25M 160GB SSD. Installer throws message...
I removed the SSD from my old Dell 5050 - it has OS and other files on it. I want to remove the OS and keep the other files so I can use it in new Dell 5070 as second drive. What is the best way to a...
The Intel Driver & Support Assistant to keep a NUC 8i7BEH/NUC8BEB updated is showing that the Solidigm Storage Tool has an available update (Version 1). When downloading and installing the SST up...