11-28-2022 01:39 AM
I'm running 72 DC s4520 drives with firmware 7CV10100 and I want to update these to 7CV10111.
The SST tool display that firmare is available but when applying the update an error occurs:
"Status":"Firmware update failed."
Booting with the ISO tool results in no compatible devices fout.
I'm running on multiple Fedora systems.
Solved! Go to Solution.
12-08-2022 07:24 AM
That's it! Thank you. I also needed to convert the controller from HBA to RAID and set the drives to Raid Capable but after that and the "sst set -system EnableLSIAdapter=True" Disks are updating. Thank you!
11-29-2022 03:58 AM
Please check the compatibility of your OS, also check the Solidigm Storag Tool Version.
You can download it here: https://www.solidigm.com/content/solidigm/us/en/support-page/drivers-downloads/ka-00085.html
Dzmitry Solidigm Customer Support
11-30-2022 02:17 AM
I've found the issue. The disks are connected via a Dell Perc H330 Mini controller (in HBA mode).
Is there an option to get this to work?
12-01-2022 04:44 AM
You need to contact Dell regarding your question, we do not support Dell products.
Solidigm Customer Support
12-07-2022 07:26 PM
Since Dell Perc H330 is using LSI-3008 chipset, you can try the command below to enable firmware update.
sst set -system EnableLSIAdapter=True
The information about LSI RAID adaptor can be found in page 7 of the SST CLI user guide.
Hope this helps.