cancel
Showing results for 
Search instead for 
Did you mean: 

Update S4520 from 7CV10100 to 7CV10111

p_van_houten
New Contributor II

Hi,

I'm running 72 DC s4520 drives with firmware 7CV10100 and I want to update these to 7CV10111.

The SST tool  display that firmare is available but when applying the update an error occurs:

"Status":"Firmware update failed."

Booting with the ISO tool results in no compatible devices fout.

I'm running on multiple Fedora systems.

 

1 ACCEPTED SOLUTION

p_van_houten
New Contributor II

Hi Sage99,

That's it! Thank you. I also needed to convert the controller from HBA to RAID and set the drives to Raid Capable but after that and the "sst set -system EnableLSIAdapter=True" Disks are updating. Thank you!

View solution in original post

5 REPLIES 5

SolidigmDzmitry
Moderator
Moderator

Hi p_van_houten,

Please check the compatibility of your OS, also check the Solidigm Storag Tool Version.
You can download it here: https://www.solidigm.com/content/solidigm/us/en/support-page/drivers-downloads/ka-00085.html

Sincerely,

Dzmitry Solidigm Customer Support

SolidigmDzmitry_0-1669723081984.png

 

Hi,

I've found the issue. The disks are connected via a Dell Perc H330 Mini controller (in HBA mode).

Is there an option to get this to work?

 

Hi p_van_houten,

You need to contact Dell regarding your question, we do not support Dell products.

 

Sincerely, 

Dzmitry

Solidigm Customer Support 

SolidigmDzmitry_0-1669898557826.png

 

 

Sage99
New Contributor II

Hi p_van_houten,

Since Dell Perc H330 is using LSI-3008 chipset, you can try the command below to enable firmware update.

sst set -system EnableLSIAdapter=True

The information about LSI RAID adaptor can be found in page 7 of the SST CLI user guide.

Hope this helps.