Update S4520 from 7CV10100 to 7CV10111

[p_van_houten]

Hi,

I'm running 72 DC s4520 drives with firmware 7CV10100 and I want to update these to 7CV10111.

The SST tool  display that firmare is available but when applying the update an error occurs:

"Status":"Firmware update failed."

Booting with the ISO tool results in no compatible devices fout.

I'm running on multiple Fedora systems.

[SolidigmDzmitry]

Hi p_van_houten,

Please check the compatibility of your OS, also check the Solidigm Storag Tool Version.
You can download it here: https://www.solidigm.com/content/solidigm/us/en/support-page/drivers-downloads/ka-00085.html

Sincerely,

Dzmitry Solidigm Customer Support

[p_van_houten]

Hi,

I've found the issue. The disks are connected via a Dell Perc H330 Mini controller (in HBA mode).

Is there an option to get this to work?

[SolidigmDzmitry]

Hi p_van_houten,

You need to contact Dell regarding your question, we do not support Dell products.

Sincerely, 

Dzmitry

Solidigm Customer Support 

[Sage99]

Hi p_van_houten,

Since Dell Perc H330 is using LSI-3008 chipset, you can try the command below to enable firmware update.

sst set -system EnableLSIAdapter=True

The information about LSI RAID adaptor can be found in page 7 of the SST CLI user guide.

Hope this helps.