Solidigm

llpyh · ‎05-02-2018

My P3608 ssd seems to have some problems recently. lspci works fine and I can find /dev/nvme*n1.

However, fdisk doesn't show this device.

isdct also cannot find information about this disk.

When using fio to test, it works fine without option "direct=1" while fails with it.

Does someone knows what happened to this ssd???

ps. information in details is listed below.

lspci -s 3d:00.0 -vv

3d:00.0 Non-Volatile memory controller: Intel Corporation PCIe Data Center SSD (rev 02) (prog-if 02 [NVM Express])

Subsystem: Intel Corporation DC P3600 SSD [Add-in Card]

Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-

Interrupt: pin A routed to IRQ 755

NUMA node: 0

Region 0: Memory at ab100000 (64-bit, non-prefetchable) [size=16K]

Expansion ROM at ab110000 [disabled] [size=64K]

Capabilities: [40] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] MSI-X: Enable- Count=32 Masked-

Vector table: BAR=0 offset=00002000

PBA: BAR=0 offset=00003000

Capabilities: [60] Express (v2) Endpoint, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <4us

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-

MaxPayload 256 bytes, MaxReadReq 512 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port # 0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <4us, L1 <4us

ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported

AtomicOpsCap: 32bit- 64bit- 128bitCAS-

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled

AtomicOpsCtl: ReqEn-

LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+

EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-

MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-

HeaderLog: 00000000 00000000 00000000 00000000

Capabilities: [150 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff

Status: NegoPending- InProgress-

Capabilities: [180 v1] Power Budgeting <?>

Capabilities: [190 v1] Alternative Routing-ID Interpretation (ARI)

ARICap: MFVC- ACS-, Next Function: 0

ARICtl: MFVC- ACS-, Function Group: 0

Capabilities: [270 v1] Device Serial Number 55-cd-2e-41-4c-a2-c3-e1

Capabilities: [2a0 v1] # 19

Kernel modules: nvme

llpyh · ‎05-03-2018

Thanks for your continuous support.

Seems that updating firmware fails for some unknown reason.

isdct version is 3.0.10. Sorry to tell that my OS is ubuntu and don't have other OS versions for testing in the present.

Are there any other ways to update the firmware?

Regards,

lpyh

idata · ‎05-04-2018

Hi lpyh,

Thanks for the reply. We recommend you to use the latest version of the Intel® SSD Data Center Tool in order to update the firmware because you are already using an old version of the tool 3.0.10. It seems that we already release a newer version of the tool and it ishttps://downloadcenter.intel.com/download/27778/Intel-SSD-Data-Center-Tool?product=87278 3.0.12. We would like to inform you that you can also use the https://downloadcenter.intel.com/download/27656/Intel-Solid-State-Drive-Toolbox?product=80096 Intel® Solid State Drive Toolbox. However, it only works with the following operating systems Windows 10*, Windows 8.1*, Windows 8*, Windows 7*. Please keep in mind that if you use Windows* you need to install the following https://downloadcenter.intel.com/download/27517/Datacenter-NVMe-Microsoft-Windows-Drivers-for-Intel-... driver. If you have the same situation, we recommend you to use one of the operating systems supported by the drive( Intel(R) Provided Windows* Server 2012 R2, Windows* Server 2008 R2 x64, Windows* 7(32bit/64bit), Windows* 8(32bit/64bit), Windows* 8.1(32bit/64bit)/ In-box Driver RHEL* 6.5,RHEL* 6.6,RHEL* 6.7,RHEL* 7.0,RHEL* 7.1,SLES11* SP4, Windows* Server 2012 R2,Windows* 8.1,Citrix* Xenserver 6.5,CentOS* 6.5) and try with the Intel® SSD Data Center Tool version 3.0.12.Please let us know the outcome of your situation. Regards,Junior M.

llpyh · ‎05-04-2018

I have uplated isdct version to 3.0.12.

However, firmware still updated failed.

Detailed messages are listed below.

isdct show -a -intelssd

- Intel SSD DC P3608 Series CVF8549000DM1P6BGN-1 -

AggregationThreshold : Inappropriate ioctl for device

AggregationTime : Inappropriate ioctl for device

ArbitrationBurst : Inappropriate ioctl for device

Bootloader : 8B1B0131

CoalescingDisable : Inappropriate ioctl for device

DevicePath : /dev/nvme0n1

DeviceStatus : Healthy

DirectivesSupported : False

DynamicMMIOEnabled : The selected drive does not support this feature.

EnduranceAnalyzer : Inappropriate ioctl for device

ErrorString :

Firmware : 8DV10171

FirmwareUpdateAvailable : Firmware=8DV101H0 Bootloader=8B1B0133

HighPriorityWeightArbitration : Inappropriate ioctl for device

IOCompletionQueuesRequested : Inappropriate ioctl for device

IOSubmissionQueuesRequested : Inappropriate ioctl for device

Index : 0

Intel : True

IntelGen3SATA : False

IntelNVMe : True

InterruptVector : Inappropriate ioctl for device

IsDualPort : False

LatencyTrackingEnabled : Inappropriate ioctl for device

LowPriorityWeightArbitration : Inappropriate ioctl for device

MediumPriorityWeightArbitration : Inappropriate ioctl for device

ModelNumber : INTEL SSDPECME016T4

NVMeControllerID : 0

NVMeMajorVersion : 1

NVMeMinorVersion : 0

NVMePowerState : Inappropriate ioctl for device

NVMeTertiaryVersion : 0

NamespaceId : 4294967295

NamespaceManagementSupported : False

NativeMaxLBA : Inappropriate ioctl for device

NumErrorLogPageEntries : 63

NumberOfNamespacesSupported : 1

OEM : Generic

PCILinkGenSpeed : 3

PCILinkWidth : 4

PLITestTimeInterval : The selected drive does not support this feature.

PhySpeed : The selected drive does not support this feature.

PhysicalSectorSize : The selected drive does not support this feature.

PowerGovernorAveragePower : The desired feature is not supported.

PowerGovernorBurstPower : The desired feature is not supported.

PowerGovernorMode : Inappropriate ioctl for device

Product : Fultondale X8

ProductFamily : Intel SSD DC P3608 Series

ProductProtocol : NVME

ReadErrorRecoveryTimer : Device does not support this command set.

SMARTEnabled : True

SMARTHealthCriticalWarningsConfiguration : Inappropriate ioctl for device

SMBusAddress : Inappropriate ioctl for device

SMI : False

SectorSize : 512

SerialNumber : CVF8549000DM1P6BGN-1

TCGSupported : False

TelemetryLogSupported : False

TempThreshold : Inappropriate ioctl for device

TemperatureLoggingInterval : The selected drive does not support this feature.

TimeLimitedErrorRecovery : Inappropriate ioctl for device

TrimSupported : True

VolatileWriteCacheEnabled : Inappropriate ioctl for device

WriteAtomicityDisableNormal : Inappropriate ioctl for device

WriteCacheReorderingStateEnabled : The selected drive does not support this feature.

WriteCacheState : The selected drive does not support this feature.

WriteErrorRecoveryTimer : Device does not support this command set.

- Intel SSD DC P3608 Series CVF8549000DM1P6BGN-2 -