- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-08-2019 05:12 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-08-2019 06:44 AM
There are two paths to go here.
The first - and definitely more difficult to find - is an adapter that has a SATA controller IC on it and this controller exposes the M.2 SATA SSD to the system over PCIe. Here's the best example I could find: https://www.amazon.com/Ableconn-PEXM2-122-Controller-Express-Adapter/dp/B01D2PXV50 (obviously does some extra things).
The second - and more common - is a simple adapter that allows you to mount the M.2 SATA SSD and then access it using the system's existing (chipset) SATA controller. This comes in two forms:
- One that houses the M.2 SATA SSD in a case identical to that of a standard 2.5" SATA SSD. You would mount this drive as you would any other 2.5" SATA SSD. Here's an example of this: https://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-M2SA/dp/B01N6PMZLW.
- One that mounts the M.2 SATA SSD onto a PCIe x1 card. The PCIe connector is only used for power. The card has a SATA connector that allows it to be connected to the system's existing (chipset) SATA controller using a standard SATA cable. Here is an example of this: https://www.amazon.com/JacobsParts-Adapter-Desktop-Express-Brackets/dp/B07PWB3G6K (obviously, does some extra things).
Hope this helps,
...S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-08-2019 05:43 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-08-2019 06:44 AM
There are two paths to go here.
The first - and definitely more difficult to find - is an adapter that has a SATA controller IC on it and this controller exposes the M.2 SATA SSD to the system over PCIe. Here's the best example I could find: https://www.amazon.com/Ableconn-PEXM2-122-Controller-Express-Adapter/dp/B01D2PXV50 (obviously does some extra things).
The second - and more common - is a simple adapter that allows you to mount the M.2 SATA SSD and then access it using the system's existing (chipset) SATA controller. This comes in two forms:
- One that houses the M.2 SATA SSD in a case identical to that of a standard 2.5" SATA SSD. You would mount this drive as you would any other 2.5" SATA SSD. Here's an example of this: https://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-M2SA/dp/B01N6PMZLW.
- One that mounts the M.2 SATA SSD onto a PCIe x1 card. The PCIe connector is only used for power. The card has a SATA connector that allows it to be connected to the system's existing (chipset) SATA controller using a standard SATA cable. Here is an example of this: https://www.amazon.com/JacobsParts-Adapter-Desktop-Express-Brackets/dp/B07PWB3G6K (obviously, does some extra things).
Hope this helps,
...S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-08-2019 10:00 PM
Thanks for you help Mr. Pearson. I was overwhelmed until You sent me to the last link about Jacobparts. My internal M.2 Sata SSD has 2 slots on 1 SSD card. Two keys are needed for the adapter card ( the M key and the K key). Jacobparts has a double board that has has one key on each ssd opton which can be used simultaneously. It is not for me. I need 2 slots on 1 SSD. I did manage to find a couple adapter cards on Amazon from Glotrends. Thanks again it really helped. Dan V.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-08-2019 11:23 PM
Ok, I don't want to throw a wrench into the machine, but you need to understand that I picked these purely as examples and I have no actual experience with using them. I have used adapters that allowed me to connected my M.2 (SATA and NVMe) and mSATA drives via USB3, but that's it.
Regardless, let us know which adapter you pick and how it goes,
...S
