This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Firmware update can't find my 80G SSD

Go to solution
idata
Esteemed Contributor III

‎12-23-2009 02:33 PM

I have a I7-920 system on an Intel board - the system has 4 drives - The SSD which I boot off of, 2 hard drives that are in a Raid configuration, and another hard drive to hold temporary large files. When I boot the firmware update, get an error message that the Intel SSD is not attached or disabled. Any ideas?

0 Kudos
1 ACCEPTED SOLUTION

Go to solution
idata
Esteemed Contributor III

‎12-23-2009 11:12 PM

Try setting your SATA ports to IDE mode for the flash only. Reset them before booting back into the OS.

View solution in original post

0 Kudos
2 REPLIES 2

Go to solution
idata
Esteemed Contributor III

‎12-23-2009 11:12 PM

Try setting your SATA ports to IDE mode for the flash only. Reset them before booting back into the OS.

0 Kudos

Go to solution
idata
Esteemed Contributor III
In response to idata

‎12-24-2009 09:10 AM

That solved the problem. Thanks

0 Kudos
"Solidigm" is a trademark of SK hynix NAND Product Solutions Corp. (d/b/a Solidigm). "Intel" is a registered trademark of Intel Corporation. Other names and brands may be claimed as the property of others. The community is supported by Khoros. Khoros's privacy policy explains how it processes personal data. © Solidigm 2024. All rights reserved.