Please help: D3-S4610 firmware update -without- the bootable ISO

[ElCoyote_]

Hi,

I have an Intel D3-S4610 drive running firmware XCV10132 that I would like to update.

I tried using the Intel ISO (issdfut_64_4.0.40.iso) but it freezes on my system (ThreadRipper Pro 5000wx series).

Is there an updated isdct rpm downloadable from somewhere?
isdctl -does- seem to find my drive properly:

# isdct load -intelssd 0
WARNING! You have selected to update the drives firmware!
Proceed with the update? (Y|N): y
Updating firmware...

- Intel SSD DC S4610 Series PHYG20XXXXXXXXXX -

Status : The selected drive contains current firmware as of this tool release.

isdct show -intelssd

- Intel SSD DC S4610 Series PHYG20XXXXXXXXXX -

DevicePath : /dev/sg0
DeviceStatus : Healthy
Firmware : XCV10132
FirmwareUpdateAvailable : The selected drive contains current firmware as of this tool release.
Index : 0
ModelNumber : INTEL SSDSC2KG019T8
ProductFamily : Intel SSD DC S4610 Series
SerialNumber : PHYG20XXXXXXXXXX

Any ideas?

[SolidigmDzmitry]

Hello ElCoyote_, 

You can find the answer by clicking on the link to your post: https://community.solidigm.com/t5/solid-state-drives-nand/intel-670p-%E5%9C%A8%E5%8F%B0%E7%81%A3%E8%...

Sincerely,
Dzmitry
Solidigm Customer Support