This is the first hardware-oriented forum I've run across, and it appears to be for a specific brand, so I apologize for being off-topic, but hope that some kind soul is familiar with these hardware intricacies and can take a few moments to enlighten me.
I can't find a compatible USB enclosure for Intel 660p SSD 2.0TB that was removed from a dead 2015 MacBook Pro. It has a notch near the center of the row of contacts that doesn't match the plastic pin in an enclosure I bought, which is closer to the right end of the row of contacts. Photos online of SSDs and enclosures (including Intel 660p!) (also including a diagram of B, M, and B+M keying) show the notch(es) closer to the end(s) of the row, so I wonder if the center notch indicates the SSD is intended ONLY for internal drive and not a USB external drive. Here's the specific contact arrangement on my drive, with contacts 'c', spaces (width of 2 contacts) 's', and the notch at 'S': ccc s cccc s ccccccc S ccccccc s cccc.
Thanks very much.
We are sorry to hear that you experiencing issues with your SSD. We will need further information (inc personal information), to investigate your issue. Please have a look on our article about it: https://www.solidigm.com/content/solidigm/us/en/support-page/installation-compatibility/ka-00001.htm.... In case of further issues with the drive contact us at https://support.solidigm.com/en-US/anonymous-createcase/ (This can also be found on our website). This will create a support ticket and we will be in touch with you as soon as possible.
Solidigm Customer Support