Intel SSD DC P4500 set MaximumLBA Error: isdct set -o json -intelssd 0 MaximumLBA=50% { "Error_Type":3, "Error_Description":"Error: NVMe command reported a problem." }

[Lei_G_Intel]

Hi Nestor，

I met the same problem, show as below.

Thanks.

Lei

OS: Centos 6.6/2.6.32

ISDCT: 3.0.9

P4500 FW: QDV10150

[idata]

Hi RadiumGu,

Thanks for the information provided. We will check this situation with our additional resources. We will keep you posted with any updates. Regards, Junior M.

[idata]

Hi RadiumGu,

Could you please confirm the following information: *Could you please let us know if the SSD is connected directly to the motherboard? Or is it connected to a RAID controller? *Have you attempted to reboot the system after running the delete command? We look forward to hearing back from you.Regards,Junior M.

[idata]

Hi RadiumGu,

We would like to know if you read our previous post. If you have any other questions, we'll be waiting for your response.Regards, Junior M.

[Lei_G_Intel]

*Could you please let us know if the SSD is connected directly to the motherboard? Or is it connected to a RAID controller?

P4500 AIC form factor, It works well in my system except ISDCT.

*Have you attempted to reboot the system after running the delete command?

Sure. I rebooted my server, but got same result.

[idata]

Hi RadiumGu,

Thanks for the information provided. We will check this with our additional resources. We will keep you posted with any updates. Regards, Junior M.