intel P3608

[SGant]

MB: SUPERMICRO X10DRH-iT

Proc: 2x INTEL Xeon E5-2620V3 2.4GHz 15MB 6C/12T

I have a question regarding Intel P3608.

i don't know if we get all the performance from the NVMe Intel P3608.

is there any other way to test the performance?

thx

CrystalDiskMark 5.2.1 x64 (C) 2007-2017 hiyohiyo

Crystal Dew World : http://crystalmark.info/

-----------------------------------------------------------------------

* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]

* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 5395.325 MB/s

Sequential Write (Q= 32,T= 1) : 2015.354 MB/s

Random Read 4KiB (Q= 32,T= 1) : 462.633 MB/s [112947.5 IOPS]

Random Write 4KiB (Q= 32,T= 1) : 436.565 MB/s [106583.3 IOPS]

Sequential Read (T= 1) : 2259.450 MB/s

Sequential Write (T= 1) : 1899.885 MB/s

Random Read 4KiB (Q= 1,T= 1) : 37.511 MB/s [ 9158.0 IOPS]

Random Write 4KiB (Q= 1,T= 1) : 210.011 MB/s [ 51272.2 IOPS]

Test : 4096 MiB [X: 0.0% (0.2/1490.4 GiB)] (x5) [Interval=5 sec]

Date : 2017/01/15 16:32:53

OS : Windows Server 2016 Server Standard (full installation) [10.0 Build 14393] (x64)

[idata]

Hello S.G.,

Intel® RSTe is supported by a different team altogether. You may need to post to the /community/tech/rapid-storage-technology Rapid Storage Technology Community to get a better answer for those error messages.Would it be possible to benchmark this drive while not on RAID? You would need to install our standard https://downloadcenter.intel.com/download/26451 NVMe drivers for this. The idea is not to test the driver, as RSTe contains the same NVMe driver, but to see if RAID is the factor negatively affecting your test results.Best regards,Carlos A.

[SGant]

here are the tests for random reads (90%LBA)

disk 1 without windows format= 412449 IOPs

disk 2 without windows format= 399461 IOPs

disk 1 WITH windows format= 308373 IOPs

disk 2 WITH windows format= 313718 IOPs

windows STRIPE= 301791

p.s.: i've also created a ticket , the response was to wait for your response

[idata]

Hello S.G.

Please use the other thread to address your RSTe error messages, it might be helpful to them if you share those screenshots with them.As far as your performance, we are investigating the issue, but do not currently have any additional troubleshooting or suggestions that we're able to provide.Best regards,Carlos A.