04-05-2018 02:23 AM
04-05-2018 12:44 PM
Hello tuyennguyen1703,
Thanks for posting. The Intel® SSD 600p uses NVMe technology. However, Windows 7* doesn't natively NVMe support and that's why it can't detect the drive.
There's a way to add the required drivers for the installation, please refer to the following guide for instructions:
https://www.intel.com/content/www/us/en/support/articles/000023002/memory-and-storage.html Windows* Installation Guide for Intel® Solid State Drive 6 Series for PCIe* with NVMe
On page 9 of the guide, you'll find two different installation methods. Please review each one to learn which applies to your situation.
Please let us know if there's anything else we can do for you.
Best regards,
Eugenio F.04-05-2018 11:27 PM
I have to connect to the PCIe slot correctly .I am currently connected through slot M2
04-06-2018 01:12 AM
I use Win7 USB3.0 Creator it runs very long .. I wait few hours is not finished
04-06-2018 06:30 AM
Hello tuyennguyen1703,
Thanks for your reply. If you're having difficulties creating the image with the USB 3.0 driver, please make sure you use a fresh Windows 7* image:https://www.microsoft.com/en-us/software-download/windows7 Download Windows 7* Disc Images (ISO)NOTE: Links to third party sites are being offered for your convenience and should not be viewed as an endorsement by Intel of the content, products, or services offered there.Best regards,Eugenio F.