Solid State Drives (NAND) - Page 247 - Solidigm

Solid State Drives (NAND)

Support for Issues Related to Solid State Drives based on NAND technology

Forum Posts

Sorted by:

Sign In to Post

Resolved! Linux installed on Intel 730 and SSD toolbox

I have an Intel 750 with Windows 7 on it. I also have an Intel 730 with Linux on it. I have no problems, these drives are just awesome (so far). My question is, the 730 obviously shows up in windows when I run the SSD toolbox. I ALMOST optimized ...

Resolved! Intel 750 PCIe SSD & Windows 10 Native Driver

I installed an Intel 750 PCIe SSD 1.2TB in a new Windows 10 workstation. I did a clean install from a UEFI boot. The installation went relatively smoothly and the drive appears to be working fine. My question is, for best performance should I inst...

Resolved! HIPM+DIPM or DIPM for Intel X25-M SSD in ThinkPad X61s?

Hi All,It's well known that Intel recommends that DIPM be enabled for Intel SSDs. Besides that, in its publication called "Designing energy efficient SATA devices" Intel states:Each of these (HIPM/DIPM) provides power savings by themselves; maximum p...

Resolved! Does 730 use HET or SET MLC?

The 3700, 3710, and 3610 all use High Endurance Technology (HET) MLC, with the first using 25nm and the other two using 20nm. The 3510 uses Standard Endurance Technology (SET) MLC. The 730 uses 20nm Compute-Quality Components. So which type of MLC do...

Resolved! Latency questions regarding 730 and 3710/3610/3510

The 730 product brief states: "Applications will benefit from the 50µs read latency." The 3x10 product brief states: "Applications benefit from 55µs typical latency with max read latencies of 500µs 99.9% of the time." No mention is made of max latenc...

Top Kudoed Authors

User

Count

280

157

74

56

32