TRIM update hosed my Windows 7 install

[idata]

Just did the firmware update and it hosed my Windows 7 installation. The updater showed a successful firware update. Initially the computer booted just fine, but once I was within Windows it installed some drivers and asked for a reboot. That's when the trouble started. Now the drive won't boot Windows 7 anymore. I don't know if it's a Dell problem or Intel problem. The Dell BIOS claims a SMART error. I have a Dell XPS 8000.

[idata]

1. I just meant what drivers had been installed during / before flashing the SSD. Afterwards (after the widely mentioned "new drivers install" thingie after reboot) those are MS again.

2. I still have the Intel tool installed and

3. I used it several times since. No problems at all.

[idata]

They said the Tool box is available, the URL give's some info but there is no link to Download the ToolBox

Does the ToolBox support RAID 0 configuration ?

Thank you

[idata]

Toolbox link: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18455

There is a download button--just scroll down and you will see it.