cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware update now available - Addresses Bad Context 13x Error

Alan_F_Intel
New Contributor III
New Contributor III

Status:

Intel has posted a firmware update for the Intel® SSD 320 Series (firmware 4PC10362) which addresses the Bad Context 13x Error being discussed on the Communities site and elsewhere. You can download the new firmware here:

http://www.intel.com/go/ssdfirmware www.intel.com/go/ssdfirmware

Also posted at this link are Read Me, Release Notes, and SSD Firmware Update Tool Guidelines which provide detailed firmware update instructions and other relevant information such as the most current firmware revision available.

What should I do if I have not experienced this issue?

In order to provide the best user experience, Intel always recommends users download and install the latest firmware. As with any storage device, Intel recommends users frequently back up their data and periodically check for firmware updates. The http://www.intel.com/go/ssdtoolbox Intel® SSD Toolbox provides a host of utilities to monitor your SSD, including displaying detailed information such as the currently installed firmware revision.

What should I do if I have already experienced this issue?

If you have already experienced a drive failure or encounter this problem before the firmware update was released, please contact your Intel representative or Intel customer support (via web: http://www.intel.com/ www.intel.com or phone: http://www.intel.com/p/en_US/support/contact/phone www.intel.com/p/en_US/support/contact/phone) for an SSD replacement. An alternative option is to use the Intel ® SSD Toolbox or similar tools to perform a secure erase in order to restore the SSD to an operational state; all data will be erased. After secure erase, update your SSD with the new firmware. The firmware update will not recover user data.

Background:

For users unfamiliar with the issue, an Intel SSD 320 Series drive may exhibit a drive capacity of 8MB and an electronic serial # field containing a message of "BAD_CTX 0000013x" caused by an unexpected power loss under specific conditions. Once this error occurs, no data on the SSD can be accessed and the user cannot write to or read from the SSD.

rgds,

Alan

NVM Solutions Group

94 REPLIES 94

idata
Esteemed Contributor III

Now i have the last 16 in test. The 48 pieces before passes all an full run h2testw and 2-3 days Stresstesting with bonnie++ in ( 8xSSD / Raid10 / Adaptec 5805 )

None of them has made any problems. GreetingsDesiderius

idata
Esteemed Contributor III

Only problem is that they usually fail when we least expect it regardless how many times we test them.

Before my 8M problem I stress tested 6 x 320 series x 160G and all seemed to to be doing wonderfully...until freeze ups came along with the dreaded 8m issue which happens even as I type this post.

CWete
New Contributor

@ sogersortep

At least one can say there is a difference after the firmware update.

Before the update 20% failed the test desiderius is performing, after the update 0% failed (until now).

Did you have the 8MB error after you updated to the latest firmware?

idata
Esteemed Contributor III

Out of the 6 drives it I had 2 that failed after the update...again!

idata
Esteemed Contributor III

sogersortep schrieb:

Out of the 6 drives it I had 2 that failed after the update...again!

Holy crap!

When will it end...