Archive
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! Intel X25m 80GB SSD, DISABLE PAGEFILE?

After reading on the web about ssd wear overtime I came across several websites claiming that people should disable pagefile as it wears the ssd out quicker. I also found a microsoft blog about win 7 and ssd's saying its fine to leave the pagefile o...

idata by • Esteemed Contributor III
  • 5656 Views
  • 4 replies
  • 0 kudos

install steps for new 80gb g2

So...this is my first foray into the world of SSD's and I want to make the right choices. Went ahead and got an 80gb g2 drive and I am going to be installing Win 7 64 bit. i was going to make sure bios is set to ahci, then update drive to latest fir...

idata by • Esteemed Contributor III
  • 4079 Views
  • 2 replies
  • 3 kudos

RST v9.5.0.1037 stable and suitable for single SSD in AHCI on Vista?

I'm looking for most stable/official/recent ahci driver to use on a single X25-M in AHCI mode on Vista (32bit) SP2.I see RST v9.5.0.1037 is available from http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3125&DwnldID=15251&lang=eng RAID:...

idata by • Esteemed Contributor III
  • 2198 Views
  • 0 replies
  • 0 kudos

Intel SSD Roadmap

http://anandtech.com/storage/showdoc.aspx?i=3747&p=4http://www.anandtech.com/storage/showdoc.aspx?i=3731I be the prices for the 300GB and 600GB prices will be through the roof.Afrosty, Can you confirm the information in the link is accurate. Thanks...

idata by • Esteemed Contributor III
  • 2988 Views
  • 0 replies
  • 0 kudos

howto tell if ssd is recognized as such

I got an x25-e for my laptop. I imaged the original hd and installed the image to the ssd. I am concerned that windows 7 may not recognize that this is an ssd. For example, defrag was turned on. How can it tell if it is recognized as an ssd by the...

Ade_l12 by • New Contributor
  • 10361 Views
  • 12 replies
  • 0 kudos