Archive
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

System hang / freeze when using X25M G2 and Windows Server 2008

Our company is trial testing general use of the X25M G2 with Windows Server 2008 R2. All the existing basic hardware works perfectly fine with all typical hard drives (disk). The Intel X25M G2 runs great except for very unusual system hang problem th...

idata by Esteemed Contributor III
  • 2313 Views
  • 4 replies
  • 0 kudos

Intel X25-M Mainstream SSDSA2M160G2R5 160Gb ?

I have just put the SSD in the computer a Gateway FX6801, formatted the drive, and with the cloning software supplied with the SSD I transfered the Win7 installation from the original Hatachi hard drive to the SSD. The bios is set to AHIC, the compu...

idata by Esteemed Contributor III
  • 5606 Views
  • 44 replies
  • 0 kudos

Update the firmware on 80GB X25-M G2???

Just bought a new 80Gb X25-M G2. It's got the 02HA firmware - should I update to the 02HD firmware, or is that only for the people who had problems with the original firmware update to 02HA?Have they solved the "bricking the drive" problem? I still...

idata by Esteemed Contributor III
  • 2969 Views
  • 4 replies
  • 2 kudos

SSDSA2M080G2GN bad benchmarks

I am getting sequential writes in the 30MB/s and reads in the 40MB/s range using AS SSD benchmark.Firmware is 2CV102HD.Could the drive encryption be the reason for this (PGP full encryption)?Thanks a lot!

idata by Esteemed Contributor III
  • 7064 Views
  • 20 replies
  • 0 kudos

Problem with 110902HD88208850.iso but no CD, only usb

Hello all,I have a INTEL SSDSA2M080G2GC and I would like to upgrade the firmware but the 110902HD88208850.iso file is useflul only with a CD writer which I don't have. Since my bios can boot from a usb key, how can I make it boot so I can upgrade my ...

idata by Esteemed Contributor III
  • 3496 Views
  • 4 replies
  • 1 kudos