160 GB G2 - Toolbox v1.2 problem - Win XP - doesn't work

[idata]

Hello

In German look down, here in english (I try it...)

I have a X-25M G2 160 GB in my notebook. The newest firmware is ok and also the newest intel toolbox is installed on win XP.

If I start the toolbox -> "Intel SSD Management Tool" -> SSD optimize --> I always have the same error message.

(please see the attachement with the error message)

I have no backup task or something like that. I also tried to stopp all tasks (processes), but the error message don't disappear.

What can I do?

Regards

fjord

Hallo

Ich habe in mein Notebook eine X-25M G2 160 GB eingebaut.

Die neuste Firmware ist ebenfalls aufgespielt und die neuste Toolbox-Software unter Win XP installiert.Wenn ich das "Intel SSD Management Tool" aufrufe und dort die SSD optimieren will, kommt immer die gleiche Fehlermeldung, siehe Anhang.

Im Hintergrund läuft kein Backup oder ähnliches. Um sicher zu gehen, habe ich alle möglichen Tasks abgeschossen, ohne Erfolg.

Woran könnte das liegen?

Grüsse fjord

[idata]

Hey Fjord! Good afternoon from Seoul in South Korea.

My name is Hyunsang and I think i found the answer to solve this problem.

Go to start menu -> Control panel -> Management tools -> Services and then,

JUST START BOTH "Microsoft Software Shadow Copy Provider" and "Volume Shadow Copy" available, and set these 2 services "automatic."

After that, I was able to run SSD Optimizer finally.

I hope this can be helpful for those who are suffering the same symptoms as me.

Hyunsang

==================================================

My computer Profile

Lenovo Thinkpad X200 7454 R-39

Windows XP Professional 32bit Service Pack 2

Intel X-25M G2 120GB

SSD Toolbox v2.01