Solidigm

PGall3 · 10-27-2015

Hello, I am testing the Intel 3510 (1.2TB) SSD to be used in a data logging application. The average data rate requirement is 60MB /sec.The OS (Windows XPembedded) is installed on a Compact Flash Card. The SSD is used for data logging only. The te...

PGall3 · 04-08-2013

Hello,I have been using 320 series SSD in an embedded system running XPembedded. Each time our system starts up we run the optimizer. With ver 1.X of the utility and a 320 series SSD the Optimization routine takes less than 10 seconds.We recently s...

PGall3 · 10-27-2009

i am using the intel G2 SSD in a headless machine (no monitor, keyboard mouse) I have been anxiouly awaiting the manual trim utility to allow us to meet requirements for data logging system. Unfortunately, I do not see an easy way to automate the t...

PGall3 · 11-16-2015

Hi JonathanOne more update on this...we repeated this test with one change. We do not run the optimizer at the start of each session.In this case, we do not see the drop in performance at the beginning of the test.Sample plot is shown below.Paul

PGall3 · 11-04-2015

Hi JonathanThanks for the suggestions. I was not aware of the new FW so we installed that but unfortunately, we have similar results.As for the other suggestions, we are using AHCI(SATA) mode and all drivers are up to date.Do you have any other thou...

PGall3 · 10-28-2015

A few more comments on my previous post1) I have tested 3 drives on two computers and they all behave similar behavior2) Firmware version is G20101303) We see similar behavior on the800GB version but the performance drop is not quite as severeAny ...

PGall3 · 05-31-2013

Hi Ken,Thanks for looking into this. We ultimately had to change our software so that we wait before accessing the SSD until after the Optimizer utility is completed.We had two issues1) When trying to write to a file we got a "memory access violati...

PGall3 · 10-28-2009

Octron,Thanks! that looks promising!One question...Is the SN of the drive required? We have dozens of systems and each system may have a dozen drives that could be used at any given time. Therefore, we will not easily know tha SN. I guess we can ...

Solidigm

User Statistics

User Activity

Intel 3510 1.2TB - Very slow write speeds after power up / optimizer run

accessing SSD while running optimizer

command line arguments for SSD Toolbox

Re: Intel 3510 1.2TB - Very slow write speeds after power up / optimizer run

Re: Intel 3510 1.2TB - Very slow write speeds after power up / optimizer run

Re: Intel 3510 1.2TB - Very slow write speeds after power up / optimizer run

Re: accessing SSD while running optimizer

Re: command line arguments for SSD Toolbox