Solidigm

NMICH1 · 08-27-2016

Hello,I am using a 400gb Intel 750 (pcie card) on a Z97 board.Using AS SSD, I find that the read latency is about 4 times higher than what I see from reviews (0.08ms vs 0.02ms). The write latency is ok. The 0.02ms seems in line with the specs of the ...

NMICH1 · 09-15-2016

It did not.As stated in my first post, I tried running the benchmark when connected to the CPU lanes (red slot). I verified that the card was operating in PCIE 3 mode. But the reported latency remained unchanged.Best regards.

NMICH1 · 09-14-2016

Hello,Thanks for the investigation.However as I indicated in my first post, moving to the CPU lanes (the recommended slot) does not change the latency (though of course it does increase max throughput).Maybe what I'm seeing is not a real problem, but...

NMICH1 · 09-03-2016

Hello,Is that the file you get when clicking "Export" ? (Attached to this post). Or is there a location I should get the file from ?Best regards,

NMICH1 · 09-01-2016

Hello,This did not help.Unless I'm mistaken, the linked guide only shows how to measure throughput - not latency (in fact, in the screenshots in the guide, average latency is above 3ms).Is there a guide on how to measure the 20 μs latency ?(I ran the...

NMICH1 · 08-31-2016

Thanks !I've tried disabling all the Windows file filters I could, but I couldn't get the latency to budge.I ran a complete check using SSD Toolbox, the drive appears healthy.

Solidigm

User Statistics

User Activity

Intel 750 : high read latency

Re: Intel 750 : high read latency

Re: Intel 750 : high read latency

Re: Intel 750 : high read latency

Re: Intel 750 : high read latency

Re: Intel 750 : high read latency