Why is the Intel 750 Slow to boot?

[RLaBa1]

Howdy Everyone. Just picked up the Intel 750 1.2TB SSD card. Installed it on my X99 Asus Rampage V board and installed Windows 7 X64 without a problem. However, I am seeing a boot performance issue. This drive is taking about 25 seconds to boot, approximately 13 seconds longer than my Samsung 850 EVO. Did a little Googling on this and apparently, I am not the only one. I have read several reviews and the ones that measure boot time / performance will say this is the slowest SSD to boot. I have provided the link below as an example.

http://techreport.com/review/28050/intel-750-series-solid-state-drive-reviewed/5 Intel's 750 Series solid-state drive reviewed - The Tech Report - Page 5

Intel - Is this going to be fixed in a future firmware release? I wont be able to justify keeping this card if first generation SSD's still outperform in terms of booting.

Thanks,

Randman76

X99 Rampage V

I-7 5960X OC to 4.4 ghz

Corsair Vengeance (4x4GB)

980 GTX-SLI

1200W PSU

[RPras2]

Hello jonathan

i am unable to use the command isdct command on Ubuntu 14.04 system.i had downloaded data center tool from intel website and installed "isdct-2.3.0.400-13.x86_64.rpm" still it is giving error

testusr@testpc-2:~$ sudo isdct show –intelssd

[sudo] password for testusr:

Syntax Error: Invalid command. Error at or around '–intelssd'.

Did you mean:

show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] -system

show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] -sensor [-intelssd [(device index)]] [id = (token ID)]

show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] -intelssd [(device index)].

what could be the possible reason for failure of commands.

Thanks

Rajnikant

[AP16]

I have no deals with Ubuntu for some years, but how you installed a rpm package? With help of Alien tool? Generally, for Ubuntu you need a .deb format package.

[jbenavides]

Hello rajnikant,

Looking at the text capture, It seems you may have entered the command using the Em dash "–", and the isdct commands require En dash "-".

This may be the reason for the message: Syntax Error: Invalid command. Error at or around '–intelssd'.

For more information about ISCDT, you can review the https://downloadcenter.intel.com/downloads/eula/23931/Intel-Solid-State-Drive-Data-Center-Tool?httpD... Intel® SSD Data Center Tool 2.3.x User Guide.

[RPras2]

Hi JFFulcrum

yes i used alien tool to converted rpm format to .deb format and then installed successfully.Now it is working but i am not able to utilize all the command mentioned in the documents section but i am trying and few of them works and few of them said syntax error.

Thanks

Rajnikant

[RPras2]

Thanks Jonathan for quick reply,it was such a small thing i could not figured it out myself.Thanks again.