This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Solidigm
- Solid State Drives (NAND)
- Intel SSD Toolbox
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
Intel SSD Toolbox
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-23-2013 12:12 PM
I have two Intel® SSD 520 Series (60GB, 2.5in SATA 6Gb/s, 25nm, MLC) installed in RAID "0" on an ASUS P8Z77-V Pro, Intel Ivy Bridge Quad i7 3770K, G.SKILL Trident X F3-2400C10D-16GTX and two HDDs with Windows 8 Pro 64-bit installed on the RAID volume. I am running Intel® Rapid Storage Technology, Kit installed: 11.7.0.1013, User interface version: 11.7.0.1013, RAID option ROM version: 11.0.0.1339, Driver version: 11.7.0.1013, ISDI version: 11.7.0.1013. I have Intel® SSD Toolbox 3.1.2 installed. When I run the Intel® SSD Optimizer, I get the message "The
Intel SSD Optimizer cannot run on a RAID array under Windows 8 or Windows Server 2012.". Intel web site Download Details says "Optimize the performance of an Intel SSD in RAID 0 using Trim functionality Intel® Rapid Storage Technology (Intel® RST) 11.0 or greater". Why is it not working?
3 REPLIES 3
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-23-2013 09:36 PM
I've seen this issue too, with Windows 8. As the error message states, it is due to some issue with Windows 8. It works fine with Windows 7.
But the good news is the Windows 8 "Optimize" feature for SSDs does work for SSDs in a RAID 0 volume. The Windows Optimize option can be run from the disks Properties option, in the Tools tab. The Windows 8 Optimize/Manual TRIM feature works with any SSD.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-24-2013 12:37 PM
Thank you parsec for your quick answer. I found the Windows 8 "Optimize". I did not know about it regarding SSD in RAID "0". I still would like Intel to fix the Intel SSD Toolbox so it can be done from the toolbox. Now I know I can do it with Windows 8 "Optimize". Thanks again.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-28-2013 01:28 PM
Hello louii,
We would recommend you to install the latest BIOS firmware for your motherboard, this way you can upgrade the RAID option ROM to a higher version of it and then proceed to download and install the latest driver for the Intel® Rapid Storage and Intel® SSD Toolbox.
Also, If you want to confirm that TRIM is enabled please follow the recommended steps at the following article:
http://www.intel.com/support/ssdc/hpssd/sb/cs-032318.htm http://www.intel.com/support/ssdc/hpssd/sb/cs-032318.htm
Regards,
Related Content
- Poor Performance from Solidigm P44 Pro 2TB drive in Solid State Drives (NAND)
- Intel 4510 SSD SMART AF EB in Solid State Drives (NAND)
- Optane SSD 905p not recognized interally on W10 and Bios in Solid State Drives (NAND)
- SSD Intel SSDPEKKW512G7: Remove write protection in Solid State Drives (NAND)
- Support for Sata Sanitize Command in Solid State Drives (NAND)
