08-28-2013 08:20 AM
When i cold-start my computer everything is fine, but when I restart my computer from within a freshly installed windows-7, the drive is not found.
If i turn off the computer and start it again, the drive is found and boots up again as usual. So the drive fails after reset.
I have upgraded the firmware of the SSD to the latest version via the SSD toolbox but still no luck. also updated laptop bios to latest version.
I had no problems in the past with the Intel SSD 510 edition.
Any ideas on what to do?Clarification:
So, when I insert my Intel 510 SSD and start windows and restart windows it works without problem. But with the Intel 530 it wails when I do restart, the BIOS does not find it after a normal reset. So that must conclude that the Intel SSD 530 has some bug? or is sensitive to some timing issue?
Should I return it? or just assume its incompatible with my laptop?
Message was edited by: andy johansson (added some clarification at the end)
10-23-2013 04:12 AM
Migel,
We are on DC12 firmware...... Did we miss something???
10-23-2013 05:30 AM
Stealth:
No, you are not missing anything.
Migel:
We are talking about the latest firmware (DC12). Not all problems are fixed.10-03-2013 07:27 PM
Same issue as everyone else 530 Series SSD 180 GB and 240 GB in HP 8470P - requires a power cycle instead of a reboot. Same workaround switch to RAID. Problem traced to Intel Rapid Storage Technology which gets installed sometime during driver setup in imaging process updates IDE ATA/ATAPI Controllers driver to Intel 7 Series Chipset Family SATA AHCI Controller. Uninstall it will make the problem go away too....
Previously using 520 Series with no issues.
10-03-2013 11:54 PM
I have installed a Intel SSD 530 in to a HP Elitebook 2540P and have experienced the same problem.
Model: SSDSC2BW120A4 Firmware DC22
10-04-2013 07:38 AM
I have the same problem with an HP Elitebook Folio 9470m and an Intel 530 240GB SSD running the latest firmware. Fortunately I noticed it after the initial load of the OS. I've changed to IDE/Legacy mode and am reloading Win7 now. Hopefully this will fix the issue.