Intel 600p1tb extremely slow writes after firmware update PSF121C

[JStid]

After updating to the latest firmware my write speeds are that of a normal HD.

[idata]

Hi Exposed,

The tests we ran with Crystal Disk Mark* are normal, the situation with slow speed seems to be only presented with AS SSD*, that it shows really different numbers. For some reason, that particular program shows way different than Crystal Disk Mark*.We would like to keep researching about this situation and engage additional resources to help you all.Please provide the logs we requested on the previous post, thanks.Regards,Nestor C

[JStid]

Here is the report requested.

[idata]

Hello Exposed,

We would like you to please check and test your SSD with the tool that was actually validated from Intel, the tool is IOmeter*. You can download it https://sourceforge.net/projects/iometer/files/iometer-stable/1.1.0/iometer-1.1.0-win64.x86_64-bin.z... here.We know it is not very simple to setup, but https://www.intel.com/content/dam/support/us/en/documents/ssdc/hpssd/ssd-750/sb/intel_ssd_750_series... here is a guide (From Page 6) that shows you, step by step, how to set it up.Regarding Crystal Disk Mark*, this tool was not validated, but we have seen score pretty close at what is advertised by us.Let us know if you can run the test and share the two results. (One is for sequential read and the other one for sequential write)Regards,Nestor C

[idata]

Hello Exposed,

We'd like to know if you were able to set up the benchmark with the program suggested on the previous post. Please let us know if you require further assistance.Regards,Nestor C

[JStid]

Sorry for the late response, been busy. Can I just do the write test or do I need to do all of them?