10-23-2019 07:10 PM
This is to upgrade a client system with sata11 drives on a supermicro X8DTN+ motherboard. Part # is from Supermicro
Solved! Go to Solution.
10-23-2019 08:16 PM
You do understand that, with this motherboard, you are limited to SATA-II (300Gb/s) throughput, right? There is no point in upgrading the drives if the desire is to get SATA-III (600Gb/s) throughput as you simply cannot get this performance with this motherboard. If, on the other hand, you are doing this to get to a bigger/better drive, then by all means proceed.
...S
10-23-2019 08:16 PM
You do understand that, with this motherboard, you are limited to SATA-II (300Gb/s) throughput, right? There is no point in upgrading the drives if the desire is to get SATA-III (600Gb/s) throughput as you simply cannot get this performance with this motherboard. If, on the other hand, you are doing this to get to a bigger/better drive, then by all means proceed.
...S