How can i do fault tolerance with two P4618?

[RMamm2]

Hello.I bought two P4618 for my server HPE DL 360 Gen10.Recently i used p4600 and p3700 (have per two).For example in p3700 800GB pci ssd in disk management i see 2 pci ssd drive work as one(if one of ssd dead second will work as active passive or raid1).Know i installed p4618 and see 4 logical drives per 3.2 tb.How can i use 6.4 with raid 1?(i have two p4618)

[RMamm2]

Hello Bruce, my last question i bought 2 physical dc p4618 how can redundant two pci?if pcie dead.p3700 can this auto ,how can i do yhis with p4618?

[BrusC_Intel]

Hello, RMamm2.

If you have the option to create a RAID 10, you may be able to set it up using the four parts, that way creating a RAID 6.4TB RAID.

I will also check if there are other options and also confirm if this is possible.

Best Regards,

Bruce C.

Intel Customer Support Technician

A Contingent Worker at Intel

[BrusC_Intel · Accepted solution]

Hello, RMamm2.

Thank you very much for waiting.

I have confirmed that setting up different RAID configurations between parts of the SSD or between SSDs should be possible.

For example, it should be possible to:

1. Create a RAID 1 between one half of drive #1 and one half of drive #2.
2. Create a RAID 10 between the four 3.2TB parts to have a 6.4TB RAID 10.

If there is anything else, please let me know.

Best Regards,

Bruce C.

Intel Customer Support Technician

A Contingent Worker at Intel

[BrusC_Intel]

Hello, RMamm2.

I wanted to follow up on your ticket to check if you need additional assistance.

If you have other questions or concerns, please let me know.

Best Regards,

Bruce C.

Intel Customer Support Technician

A Contingent Worker at Intel

[BrusC_Intel]

Hello, RMamm2.

Good day,

This message is to follow up on your ticket to check if further assistance is required.

I previously mentioned that setting up different RAID configurations between parts of the SSD or between SSDs should be possible.

Since there has been no confirmation or other questions, I will proceed to close the thread for now.

If you require any type of assistance from Intel in the future, you can always contact us back.

Best Regards,

Bruce C.

Intel Customer Support Technician

A Contingent Worker at Intel