02-11-2018 08:57 AM
Hello,
I have recently bought an Intel SSD Pro 6000p 512GB M.2 for use as a Windows 10 Enterprise Bitlocker hardware encrypted System drive. First of all I have updated the SSD to the latest Firmware PFS121P. Then I wanted to use the SSD Pro Administrator Tool 2.0.2 to enable eDrive like it is https://www.intel.de/content/www/de/de/solid-state-drives/ssd-pro-2500-series-edrive-solutions-bluep... documented for the Pro 2500. But since the Tool showed "eDrive Support: False" I did a PSID Revert but that didn´t help. Also trying to enable eDrive Support anyway resulted in the Message "Error: Configuration Update failed". I have attached a Snapshot of the error.
02-15-2018 03:48 AM
02-15-2018 06:05 AM
02-15-2018 07:40 AM
@ Torsen2k6 - Glad your issues were fixed
... quick update for Andres V.
After using the running the older Admin Version, I decided to run SSD Toolbox 3.5.0 and and saw the following:
Error was listed as critical within the Smart Details attributes, stating contact Support or RMA. I decided to remove the drive and left it for an hour. Reinstall and found the drive Health back to full and no errors listed as critical. On the off chance that the hard power off might have fixed the utility issue. I ran 2.0.1 and found the following:
EDrive Supported has changed back to False. However enable command failed as previously stated.
Any comments or should I look to RMA Warranty with Intel. The critical listing issue has me a bit troubled.
Regards,
G. Walker.
02-15-2018 08:59 AM
Hello torsten2k6,
I'm glad to hear that you could enable eDrive on your SSD. Thank you for sharing your results with the community, we really appreciate it. Regards,Andres V.02-15-2018 09:01 AM
Hello Gordon,
Thank you for the screenshots posted. You mentioned in a previous post that "Intel Support seems to be pushing myself to contact Dell…", I assume that assistance is been provided via our email support. If you are considering to begin a replacement process, they can provide the adequate guidance. Otherwise, could you please share the report generated by the Intel® System Support Utility for Windows* (https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility-for-Windows- https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility-for-Windows-)? You also mentioned that the eDrive Supported status "has changed back to False". Does this mean that at a certain point you were able to enable eDrive? Under what conditions were you able to enable eDrive? I'll be waiting for your response. Regards,Andres V.