cancel
Showing results for 
Search instead for 
Did you mean: 

Discrepancy in End-to-End Error Detection Threshold

idata
Esteemed Contributor III

I have a SSD 520 Series 180GB. Firmware version is LCSi.

The SMART attributes reported by the SSD Toolbox says the B8 End-to-End Error Detection Count threshold is "97". However, the Help information says the threshold is "90".

Is this a problem?

Any guidance is appreciated.

Jim

1 REPLY 1

KenF_Intel
Contributor

Hi Jim,

The discrepancy should not be an issue, but the firmware version on your drive indicates that the drive is a pre-production unit. You will need to check with your source for the SSD for support.