cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware update now available - Addresses Bad Context 13x Error

Alan_F_Intel
New Contributor III
New Contributor III

Status:

Intel has posted a firmware update for the Intel® SSD 320 Series (firmware 4PC10362) which addresses the Bad Context 13x Error being discussed on the Communities site and elsewhere. You can download the new firmware here:

http://www.intel.com/go/ssdfirmware www.intel.com/go/ssdfirmware

Also posted at this link are Read Me, Release Notes, and SSD Firmware Update Tool Guidelines which provide detailed firmware update instructions and other relevant information such as the most current firmware revision available.

What should I do if I have not experienced this issue?

In order to provide the best user experience, Intel always recommends users download and install the latest firmware. As with any storage device, Intel recommends users frequently back up their data and periodically check for firmware updates. The http://www.intel.com/go/ssdtoolbox Intel® SSD Toolbox provides a host of utilities to monitor your SSD, including displaying detailed information such as the currently installed firmware revision.

What should I do if I have already experienced this issue?

If you have already experienced a drive failure or encounter this problem before the firmware update was released, please contact your Intel representative or Intel customer support (via web: http://www.intel.com/ www.intel.com or phone: http://www.intel.com/p/en_US/support/contact/phone www.intel.com/p/en_US/support/contact/phone) for an SSD replacement. An alternative option is to use the Intel ® SSD Toolbox or similar tools to perform a secure erase in order to restore the SSD to an operational state; all data will be erased. After secure erase, update your SSD with the new firmware. The firmware update will not recover user data.

Background:

For users unfamiliar with the issue, an Intel SSD 320 Series drive may exhibit a drive capacity of 8MB and an electronic serial # field containing a message of "BAD_CTX 0000013x" caused by an unexpected power loss under specific conditions. Once this error occurs, no data on the SSD can be accessed and the user cannot write to or read from the SSD.

rgds,

Alan

NVM Solutions Group

94 REPLIES 94

idata
Esteemed Contributor III

Also the last 16 SSDs pass the tests without problems. Now we send them to our customer and hope they will also survive in productive competition.

Greetings

Desiderius

idata
Esteemed Contributor III

The 64pieces 160GB 320er SSD now in productive conditions for over an month. No 8Mb Bug occur again and my customer told me that the speed is fantastic. At the moment we are really happy with 320er SSDs in servers.

Greetings Dediderius

CWete
New Contributor

Thanks for the update desiderius.

I have 4 320 drives in RAID configuration, haven't had a problem wit them yet.

(fingers crossed)

idata
Esteemed Contributor III

I don't have an optical drive to burn this iso to and then to install the firmware update from. Could you give instructions how to write the iso to a usb flash drive and make it bootable please? I managed to do this with the Windows 7 installation media and make a bootable usb flash drive for it using Microsoft's USB/DVD Download Tool and thus install Windows 7 on my pc, so surely it must be possible to write this iso to a usb flash drive and make it bootable and install the firmware update from it. I have googled but cannot easily find how to write this iso to a usb flash drive and make it bootable.

idata
Esteemed Contributor III

Please take a look at this link: /thread/8906 http://communities.intel.com/thread/8906