Announcements

The Solidigm Community will be discontinued on November 13, 2026.
For product Information, documentation, support, and other resources, please visit Solidigm Support.

Archive
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Intel RST on Marvell controller

I have just installed a 240Gb 520 on my P6X58D ASUS board but in order to get the 6Gbs speed I must use the Marvell controllers this in turn activates the marvel storage controller which then makes the intel tool box useless.Can I use, and how, the I...

idata by • Esteemed Contributor III
  • 4535 Views
  • 2 replies
  • 1 kudos

Intel 520 chkdsk volume bitmap error

Sometimes I run the chkdsk utility due to an ntfs error in the windows log, and it usually finds a volume bitmap error in the filesystem. I then rerun chkdsk and low and behold the error mysteriously disappears. If I let chkdsk run at boot after it ...

idata by • Esteemed Contributor III
  • 2818 Views
  • 0 replies
  • 0 kudos

Updating firmware in a mfr. oem X25-M

I'm considering purchasing an X25-M. It's an OEM unit, ie. pulled out of a Lenovo, HP, etc machine. Is it possible to update the firmware in a drive like this with Intel's firmware tool if it doesn't have the current 02M3 firmware? I'm asking sinc...

idata by • Esteemed Contributor III
  • 3773 Views
  • 2 replies
  • 0 kudos

Resolved! Can you recover Intel SSD 320 80GB drive after getting the 8MB error?

I've used an Intel 320 80GB drive for about 3 weeks before getting this error. After losing power my pc couldn't find my OS. When I looked the drive said it was only 8MB. I don't recall seeing the "Bad Context 13x Error" anyplace but I'm assuming t...

idata by • Esteemed Contributor III
  • 7608 Views
  • 7 replies
  • 0 kudos

Please optimize my benchmarks

SSD: Intel 320 80GB (no problems, yet )Motherboard: http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=IP35+Pro&fMTYPE=LGA775 Abit IP35 ProDrivers used: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20624&P...

idata by • Esteemed Contributor III
  • 3948 Views
  • 2 replies
  • 0 kudos