Archive
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Why such poor benchmarks with three X25M RAID0 on Adaptec 5405?

I have three 80 GB X25-m (G2) on an Adaptec 5405. The partition is aligned. Here's what I get on AS SSD Benchmark:238 MB/ SEC reads are not what I expected. I expected about 600 MB/ SEC. Write speed is mediocre. I've got the latest Win64 drivers ...

idata by Esteemed Contributor III
  • 2186 Views
  • 1 replies
  • 0 kudos

How many ports should a RAID array consist of?

Hi,I know it's perhaps a silly question, but when i load up my Intel Matrix storage console i see this:3 ports?Is that normal?Any help would be greatly appreciated!

idata by Esteemed Contributor III
  • 1606 Views
  • 0 replies
  • 0 kudos

X25-M G2 SSD Filled up with some hidden data then cleared?

Today I happened to notice my X25-M G2 fill up with some hidden data then after it was almost completely full it cleared? I watched in "My Computer" as the free space available on the C drive of my SSD kept dropping by the minute. I've never ran th...

idata by Esteemed Contributor III
  • 2843 Views
  • 3 replies
  • 0 kudos

Will Toolbox work without AHCI?

I've just installed an X-25V (FW: 02HB) with Win7x64 on a system with an Nvidia 680i SLI MoBo Chipset. This is an older Dell XPS 720 with the awful Dell BIOS which won't let me set AHCI/IDE within BIOS.The Nvidia Nforce Storage Controller takes over...

idata by Esteemed Contributor III
  • 5046 Views
  • 14 replies
  • 5 kudos

X25-M G2 - Raid Problem

Installed W7 64 bit on this new disk a week ago. It has firmware 02HA. I have a dual boot system with Vista x86 on Raid 0 and W7 64 bit on this SSD. When trying to run the toolbox it says "Raid Not Supported".I have nVidia Chipset 680i. In the Device...

idata by Esteemed Contributor III
  • 5008 Views
  • 14 replies
  • 0 kudos