08-13-2011 08:17 PM
Status:
Intel has reproduced, identified root cause, and developed a firmware update which addresses the Bad Context 13x Error being discussed on the Communities site and elsewhere.
Response plan:
The new firmware update is in final validation testing and is targeted for release on Intel® Communities within the next two weeks. Intel takes firmware updates and issues of reliability very seriously and is taking extra steps to support a smooth release. We appreciate your patience.
What should I do if I have not experienced this issue?
To minimize occurrence, if a system requires a shut down, Intel recommends using that system's standard power shut down sequence. As with any storage device, Intel recommends users frequently back up their data. Download and install the new firmware when it is available. As with our previous firmware updates, a secure erase is not required.
What should I do if I have experienced this issue?
If you have already experienced a drive failure or encounter this problem before the firmware update is released, please contact your Intel representative or Intel customer support (via web: http://www.intel.com/ www.intel.com or phone: http://www.intel.com/p/en_US/support/contact/phone www.intel.com/p/en_US/support/contact/phone) for an SSD replacement. An alternative option is to use the Intel ® SSD Toolbox or similar tools to perform a secure erase in order to restore the SSD to an operational state; all data will be erased. After secure erase, update your SSD with the upcoming firmware. The pending firmware update will not recover user data.
Background:
For users unfamiliar with the issue, an Intel SSD 320 Series drive may exhibit a drive capacity of 8MB and an electronic serial # field containing a message of "BAD_CTX 0000013x" due to an unexpected power loss under specific conditions. Once this error occurs, no data on the SSD can be accessed and the user cannot write to or read from the SSD.
Rgds,
Scott
Intel Corporation
08-16-2011 07:22 AM
After spending almost $3000.00 on Intel SSD's and have 4 of them bite the dust the first 2-3 days you would probably be as frustrated as I am, and what really bothers me in the forums isn't the BS but Intel's indifference on the issue which you have to admit it has been adressed for quite sometime now.
08-15-2011 04:52 PM
If I have set an ATA password I know I have to remove it in order to apply the firmware. Will removing the password destroy my data?
08-17-2011 02:51 AM
Hello,
Would you fix the issue with temperature sensor?
May be you'll set SMART to inform the controller with default temperature of 30 degree Celcius?
I hope not only me wish that fix.
Thank you!
08-17-2011 06:03 AM
afaik intel 320series didn't have temperature sensor
i think other user ever mention regarding this in other threads too
you should email intel support incase you want to make sure about this
08-17-2011 06:12 AM
Hard disks have temperature sensors, motherboards have several. My GTX 260 has several as well. Why not the SSD, sensors are not expensive to add to any product.
Detecting a rise in temp would allow for a server to warn the manager that a fan has failed.