cancel
Showing results for 
Search instead for 
Did you mean: 

Win10-64 system with 128gb SSD600p drive and a 2T raid issue.

tv
New Contributor

i have an asus Win10 system with 128gb SSD600p M2 drive and a 2T raid installed. Initially i set up Win10 on the SSD but did not like the way it worked so i reformatted the system with Win10 on the 2T raid. Now i can't get the SSd to appear as a suitable drive. The SSD toolbox sees it but Win Disk Manager does not.

2 REPLIES 2

idata
Esteemed Contributor III

Hello T_V,

We understand you're having issues getting your Intel® SSD 600p Series to be recognized. In order to better assist you, we would like some more information:

  1. Are you unable to see the 600p in Disk Management (diskmgmt.msc) or Device Manager (devmgmt.msc)?
  2. Which version of the Intel® SSD toolbox are you using?
  3. What is the firmware version of your drive?
  4. Did you perform a secure erase/low-level format on the drive? If so, what method or tool did you use?
  5. Are you able to detect the drive using diskpart (Command Prompt (admin) > diskpart > list disk)
  6. What is the brand and model of your computer or motherboard?

We look forward to hearing back from you.

Best regards,

Carlos A.

idata
Esteemed Contributor III

Hello T_V,

We haven't heard back from you in a while, has your issue been resolved?Best regards,Carlos A.