Just installed a P3600 NVMe 2.5" drive. The drive shows up correctly, with no issues, and handles I/O within windows just fine.
However, if I try to run the isdct app, with isdct -show intelssd it *only* shows the two standard Intel SSDs in the system (Raid 0 DC S3700s), and NOT the P3600 NVMe drive.
I assume this is a bug? If so, when can we get a fix?
I expect your running Windows* and the answer is that you are using the built in NVMe driver but for Intel DataCenter tool to recognize the drive the Intel NVMe driver is needed.
Running Windows 8.1, and I already installed the latest Intel NVMe driver (shows as Intel Solid-State Drive P3700/P3600/P3500/750 series) 220.127.116.112, date 2/4/2015
Has this been tested with both regular Intel SSDs and NVMe SSDs installed? I'm guessing thats the issue here, unfortunately OS is installed on the regular SSDs so I can't remove them.
It should work fine with SATA based SSD and SSD P3600. I'm currently using an add in card SSD 750 (NVMe) and SSD 730 is the boot drive. I would expect your configuration to work the same.
Can you provide the motherboard model, bios and how the SSD P3600 is connected? ie. using an HBA or cable model ___ and what is the controller.
Possibly load SSD toolbox and export the boot drive info? Maybe it will show the SSD 750 and you can export that also...
It does not. Note that the SSD P3600 works just fine, is formatted and seen by the OS, and has reliable I/O. So the system clearly sees the drive, its just the isdct tool that does not. Also note that in my case, the boot drives are a pair in RAID0.
Interestingly enough, SSDtoolbox does see the drive (and shows firmware 8DV1ND01). Its just the isdct tool that only shows the S3700 drives, but not this one. Unfortunately, isdct is the tool needed to manage and update P3600 nvme drives....