Currently using this SSD via my PCIe as a book drive but experiencing problems installing the Intel driver(s)
I have downloaded the latest Intel SSD Data Center Family for NVMe Drivers and ran the installation. Application then goes through the motions and ask for a reboot ----> Once the windows desktop appears again i check my Device manager and it stills shows Microsoft Driver 6.3.9600.16384 dated 21/06/2006.
What am I doing wrong?
I also have the Intel SSD toolbox running (Fully up to date) and it shows that everything is fine.
Many thanks in advance for any help.
Hello Pumpsy1,We understand you're having issues installing the latest Intel® SSD NVMe* drivers.Before we begin please make sure to back up any important data on the SSD before troubleshooting. You may also want to ensure that your working with the latest BIOS version available from your computer manufacturer, you will also need to make sure that you're using a 64-bit version of Windows*.In this case, we can recommend following the "Have Disk" driver installation method outlined in the Installation Guide:- http://www.intel.com/content/dam/support/us/en/documents/ssdc/data-center-ssds/Intel%20NVMe%20Instal... Intel® SSD NVMe* Installation Guide (Page 10, Section 3.1.2).If this does not work, you may want to perform a clean installation instead:1. Download and save the latest https://downloadcenter.intel.com/download/26451/Intel-SSD-Data-Center-Family-for-NVMe-Drivers Intel® NVMe* driver to your SSD or a flash storage device.2. Control Panel > Device Manager > Storage Controllers > Locate and right click on your Intel® SSD 750 Series > Choose to Uninstall > Make sure you mark the option to "Delete the driver software for this device," if available.3. Install the latest Intel® Solid-State Drive Data Center Family for NVMe Drivers that you downloaded before. You may follow either of the two driver installation methods outlined in the User Guide, Page 8 to 10.We look forward to hearing back from you.Best regards,Carlos A.