I just got a 240GB 730 a couple days ago and I'm very disappointed with it. It seems like it is "stuck" at SATA II write speeds.
Either that or the drive just performs very poorly.
Corsair Vengeance 2x4GB
WD Black 2TB (data)
System is not overclocked, running Windows 7 64bit. New build, new installation, using most recent drivers from Asus.
See how the write speed never exceeds 3GB/s? (Yes I am using one of the Intel 6GB/s ports on the motherboard)
So I tried different drivers, all sorts of things, re-installed the OS a couple times and this is all I get.
I then image the system, replace the drive with a 2.5 year old OCZ Vertex 4 SSD, restore the image onto it and get this:
Note that all I changed was the drive, used the same cable and everything, restored the image containing the same drivers, no changes were made in the BIOS.
(Obviously it is not my motherboard or BIOS at this point).
A couple months ago I built almost the exact same system for an employee of mine.
Only difference is I got her the non-"K" 3770 CPU and a Intel 530 instead of the 730.
She let me borrow the drive, I imaged her drive as a backup and restore "my" image onto it in my system.
(same system image used in both screenshots above)
I like that drive
So my question is, should my brand new 730 in the top screenshot really perform so poorly or is there a problem?
Thanks for any help or suggestions you can give me.
Here is the drive in a completely different computer.
This is the computer in my office, I have been using it with no problems for a couple years.
Very similar specs because I built the new system for redundancy, if I had a problem with my office computer I wanted to be able to swap them out quickly.
ASUS P8Z77-V PRO
Another Intel 3770K
Corsair Vengeance RAM, this time 16GB
Same poor results.
I simply put the drive in the older system and it booted right up.
To be sure it wasn't a driver problem or some other issue I then used diskpart from a windows 7 disc to clean the drive, reloaded a clean version of Windows 7 64bit and ended up with the same results.
The drive is defective.
We would like to recommend some actions you can try before considering the drive as defective:
1. Confirm that the drive is running at SATA 3 speeds.
2. For testing and benchmarking we would advise you to usehttp://sourceforge.net/projects/iometer/ IOmeter. Also, we would like to the see the results if you increase the Queue Depth in ATTO to 10 (the maximum allowed).
Thank you very much Jonathan for taking the time to try to help me.
Atto Queue Depth 10
Attached are a couple results from IOmeter.
I was not sure how long to run it, I choose 3 minutes each. I also selected 3 of 4 cores (I have hyperthreading off in the BIOS)
I'm very sorry if I missed any settings, I'm not familiar with that tool.
I'll run some more when I get a break later tonight.