Hi all. Hope someone can help me.
I would like to update the SSD firmware from 335S to 335T. I downloaded the firmware updater from here : http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18363 Download Center And burned it to a blank CD as per the instructions provided. I'm using a Mac Mini so there is no internal CD drive, so I'm using the external Apple Superdrive.
I could successfully boot the CD but after some blurb, I get a black screen and the following dialogue (photo attached) pressing keys doesn't have
any effect and I'm not able to proceed further. It basically just hangs. I think I waited around ten mins to see if anything would happen, then rebooted back into Mac OS. Any ideas what I could be doing wrong? Thanks very much in advance.
I'm having a similar problem to upgrade my SSD 335 series 240GB. I burned the cd following every instruction provided by the intel's PDF which I downloaded along with de ISO file from the support area of this website. I tried both CD and DVD.
I shut down with the disk made with "Disk Utility" inside the superdrive, wait for the 10 seconds.
When I start holding the key "C" the superdrive activates(by the sound it makes) and the screen goes from grey to black, then an error message appears on the top says:
"No bootable device found - insert a bootable disk and press any key".
After that I can't do anything but to hold the power button and wait to restart.
PS: I don't use windows. Only mountain lion is installed. Could this be the problem?
Do I need a windows partition to upgrade my ssd's firmware from 335S to 335T???
Thanks in advance