cancel
Showing results for 
Search instead for 
Did you mean: 

DC S3700 with ASSERT_A368 & logic disable

KMarb
New Contributor

Hi There,

I have a DC S3700 I bought from someone and it functioned well until just a few days ago when its capacity dropped to 8.4 MB and my computer wouldn't boot.

I connected it to a windows pc to see if the SSD toolbox software would help and the buttons were greyed out so I couldn't do a format or a firmware update.

I then downloaded the SSD Datacenter Tool to see that would help and I find that the drive serial number is "ASSERT_A368" and it has ancient firmware on it version 5DV10250.

ISDCT says "Selected drive is in a disable logical state." and I can't format the drive or update the firmware using ISDCT and I get the "disable logical state" error again.

Is there a way to fix this?

Thanks!

Karl

2 REPLIES 2

idata
Esteemed Contributor III

Karrrl,

According to error you are getting with this SSD: "ASSERT_A368" disable logical state, we need to inform you we do not have a way to recover the SSD.Also we would like to inform you about the warranty: "Intel warrants to the purchaser of the Product specified above in its original sealed packaging ("Original Purchaser") and to the purchaser of a computer system built by an Original Purchaser containing the Product ("Original System Customer")".You can check the document in this http://www.intel.com/content/dam/support/us/en/documents/ssdc/hpssd/sb/dcs3700warranty.pdf link.In case you would like to get further assistance, you can always contact us in any of these http://www.intel.com/content/www/us/en/support/contact-support.html# @16 optionsNC

idata
Esteemed Contributor III

Karrrl,

We are following up and we would like to know if you were able to get in contact with our support center?We will be waiting for your response.NC