Solid State Drives (NAND) - Page 96 - Solidigm

Solid State Drives (NAND)

Support for Issues Related to Solid State Drives based on NAND technology

Forum Posts

Sorted by:

Sign In to Post

Opal status and secure erase.

Hi, i have an Intel SSD Pro 5400s, which is inaccessible at the moment (can't initialize or create partition).I have tried secure erase, but without success.Also tried to run psid_revert, but again with no successHow to resolve the issue? Opal status...

Sequential speeds extremely low

Hi there! I'm just trying to figure out why my SSD (SSDSC2CT240A4) is performing poorly, I ran 'Userbenchmark' on it and it came back with the following:Read 209Write 162Mixed 184SusWrite 19042% 186 MB/sPerforming below potential (19th percentile)If ...

Internal IO timeout on Intel NVMe drive

Hello Team,My customer informed that NVMe drive on Servers disappears all of sudden at OS levelArray controller can't recognize the drive either.That happens across multiple servers.As a workaround, they tried NVMe drive replacement, then it fixedSo...

Intel DC P4510 U.2 are not recognized in ESXI

Hello,we use a backplane from Supermicro with 4x DC P4510 1GB with a Broadcom 9400-16i controller. The hard disks are recognized in the BIOS and displayed correctly. In the ESXI the drives do not appear after booting.We use:Fresh Installation - VMWar...

Is there any significant difference between a 256GB and 512GB version of the 760P drives?

Hey all. So, I'm really at a loss here. We have a number of Lenovo P50 and P51 laptops which have been running extremely slow for reasons we don't understand. So our solution was to replace the 5400RPM drives with SSD drives. So for some testing we p...

Top Kudoed Authors

User

Count

280

157

74

56

32