On Linux, the Solidigm Storate Tool shows "No results" when running `sudo sst show -ssd`. It will not detect my Intel DC S3610.I need the SST tool to upgrade the firmware as well as configure sectorsize to 4096 from 512. I am also looking to set up T...
Hi,In the last few weeks I noticed my system feels "stalled" from time to time, when opening the taskmanager I saw my 660p is at 100% writing about ~30mb/s - even with the system is only lightly loaded (browsing the web, developing with visual studi...
suddenly i cant reformat to 4096 sector sizei changed it several times before from 512 to 4k and backdefault secure erase completes ok, but if i specify lba format it gives error (nvme format --lbaf=3)NVME status: INTERNAL: The command was not comple...
Hi Team.On a DELL PowerEdge R630 server, with VMWare ESXi 7 (ESXi-7.0U3j-21053776-standard), with a PERC H730P Mini controller (LSI SAS 3108, driver lsi_mr3, v7.718.02.00-1vmw.703.0.20.19193900), I am unable to use of your CLI utility sst v1.5 and/or...
Hello,The SSD hard drive currently in use, 99% health, S.M.A.R.T. C3 value is constantly increasing, is this a defect, should I worry about it?Please refer to the relevant information below-------------------------------------------------------------...
