cancel
Showing results for 
Search instead for 
Did you mean: 

7600P不能制作为启动盘,另外启动时显示扫描和修复

常jian
New Contributor II

是7600p 1t的​固态盘,能在BIOS里面看到,我将它做为启动盘安装Win10,整个安装过程无报错。但是启动时说是“No boot device”,这时在BIOS中是能看到7600p的。

我也试过拔掉原来固态,单独仅7600p安装Win10,还是不能启动。比较奇怪的是,我用原来的固态硬盘引导启动后,在资源管理器里面看7600p,奇怪的竟是空白盘,我刚刚还新安装了Win10过程的,没有出错信息。

另外,我现在将7600P做为数据盘,用原来的固态盘启动,就是每次启动时都显示“正在扫描和修复驱动器(\\?\Volume{84910fa4-011c-409a-8ec7-1527c9cc628e}):已完成100%”。

7600p固态已经升级是 L12C。

请师傅指导,这两个问题能解决吗?

1 ACCEPTED SOLUTION

LeonWaksman
Contributor II
  1. Remove all other drives from your computer. Leave only the 7600p installed.
  2. Boot into BIOS and verify that the M.2 slot is enabled and the 7600p is recognized.
  3. UEFI Boot in BIOS should be enabled. The 7600p is an NVMe drive that's works with UEFI boot.
  4. Please prepare your installation media (you need 8GB – 32GB USB stick), using Microsoft Media Creation Tool.
  5. With the installation media inserted into rear USB slot, power ON your computer.
  6. Your computer should boot from the installation USB .
  7. Follow this tutorial to continue with installation.
  8. In para. 7 you may enter Product Key from the Microsoft Distribution you bought.
  9. Skip on para. 12 and continue in para. 13. Important, do not format drive where you want to install Windows, rather delete all existing partitions from this drive, till you see one unallocated space.
  10. Press Next and continue with the installation.

Leon

View solution in original post

12 REPLIES 12

LeonWaksman
Contributor II
  1. Remove all other drives from your computer. Leave only the 7600p installed.
  2. Boot into BIOS and verify that the M.2 slot is enabled and the 7600p is recognized.
  3. UEFI Boot in BIOS should be enabled. The 7600p is an NVMe drive that's works with UEFI boot.
  4. Please prepare your installation media (you need 8GB – 32GB USB stick), using Microsoft Media Creation Tool.
  5. With the installation media inserted into rear USB slot, power ON your computer.
  6. Your computer should boot from the installation USB .
  7. Follow this tutorial to continue with installation.
  8. In para. 7 you may enter Product Key from the Microsoft Distribution you bought.
  9. Skip on para. 12 and continue in para. 13. Important, do not format drive where you want to install Windows, rather delete all existing partitions from this drive, till you see one unallocated space.
  10. Press Next and continue with the installation.

Leon

常jian
New Contributor II

谢谢。​

但是我已这样做过多次,过程都是安装成功。但是,安装结束后用固态盘启动时,就是只显示dell圆圈标识没到windows4方块标识时,屏幕说 No boot device 。

然后,我将另一块原来的 SSD装上,启动原来的Win10,在资源管理器里面看刚装了win10但不能启动的D盘,竟然没有任何内容,不知道是什么原因。

我从网上搜索,说是固态盘有掉电的说法,是不是可以在win系统、或者固态盘参数里改变哪个设置?有没有这方面的可能?

  1. What is P/N of the original SSD?
  2. Is the UEFI boot enabled in BIOS?
  3. Is the 7600p SSD installed in M.2 PCIe 3.1 x4 slot ?
  4. Can you see the 7200p in BIOS?

Leon

常jian
New Contributor II

答:

1、再等两天我拆开机箱拍张照片,上面有P/N;

2、是UEFI方式;

3、主板上只有一个M.2接口,在原装SSD下面,我就插在那里;

4、在BIOS启动菜单能看见7600P,因为我反复装过系统多次,见过有UEFI方式的,也见过有BOOT manage方式的。