cancel
Showing results for 
Search instead for 
Did you mean: 

Workstation with X25-M SSD hangs in POST in AHCI/RAID-mode - how to fix?

idata
Esteemed Contributor III

I have a problem with my X25-M SSD in a Fujitsu W480 Workstation (Intel® 3450 chipset, Onboard Sata Controller).

The Workstation hangs in Post with Status:90 if the SSD is connected and the Onboard-Sata Controller is not set to IDE-mode (AHCI or RAID).

The SSD is updated to firmware 02HD. Bios on the Fujitsu is Phoenix 1.15 (newest available).

Any ideas how to fix the problem?

1 REPLY 1

idata
Esteemed Contributor III

Update:

Tested SSD in an old DELL 9200 Workstaion, no problem in POST there.

AS Benchmark in Dell 9200 (Auto/Raid Mode) and in Fujitsu Celsius W480 (IDE mode):