Archive
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! Intel X25m 80GB SSD, DISABLE PAGEFILE?

After reading on the web about ssd wear overtime I came across several websites claiming that people should disable pagefile as it wears the ssd out quicker. I also found a microsoft blog about win 7 and ssd's saying its fine to leave the pagefile o...

idata by Esteemed Contributor III
  • 2879 Views
  • 4 replies
  • 0 kudos

install steps for new 80gb g2

So...this is my first foray into the world of SSD's and I want to make the right choices. Went ahead and got an 80gb g2 drive and I am going to be installing Win 7 64 bit. i was going to make sure bios is set to ahci, then update drive to latest fir...

idata by Esteemed Contributor III
  • 2310 Views
  • 2 replies
  • 3 kudos

RST v9.5.0.1037 stable and suitable for single SSD in AHCI on Vista?

I'm looking for most stable/official/recent ahci driver to use on a single X25-M in AHCI mode on Vista (32bit) SP2.I see RST v9.5.0.1037 is available from http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3125&DwnldID=15251&lang=eng RAID:...

idata by Esteemed Contributor III
  • 1411 Views
  • 0 replies
  • 0 kudos

Intel SSD Roadmap

http://anandtech.com/storage/showdoc.aspx?i=3747&p=4http://www.anandtech.com/storage/showdoc.aspx?i=3731I be the prices for the 300GB and 600GB prices will be through the roof.Afrosty, Can you confirm the information in the link is accurate. Thanks...

idata by Esteemed Contributor III
  • 1829 Views
  • 0 replies
  • 0 kudos

howto tell if ssd is recognized as such

I got an x25-e for my laptop. I imaged the original hd and installed the image to the ssd. I am concerned that windows 7 may not recognize that this is an ssd. For example, defrag was turned on. How can it tell if it is recognized as an ssd by the...

Ade_l12 by New Contributor
  • 3863 Views
  • 12 replies
  • 0 kudos