Intel 530 SSD S.M.A.R.T issue

[MRahn]

Hello,

I have strange issue with my brand new 2.5" Intel 530 SSD 120GB. Every time I start it, in SMART Self-test log appears new test with status:

"Offline - Interrupted (host reset) - Remaining 10%".

If I run the test manually it completes with no errors. And that's really every time. Also SMART info says:

General SMART Values:

Offline data collection status: (0x05) Offline data collection activitwas aborted by an interrupting command from host.

Auto Offline Data Collection: Disabled.

I updated the SSD firmware to latest DC32. Device Model is: INTEL SSDSC2BW120A4. Also tested on different machines and still not found a solution.

Does somebody else has this problem and is there any fix for it?

[MRahn]

I'm using the last version of smartmontools (6.2) under Linux OS.

[Jose_H_Intel1]

We are taking a look into this.

[MRahn]

Hi joe_intel,

is there some new info about this? As I can see there are other people with the same problem...

[SV7]

My 240Gb 530 has the same issue. After each "power off/power on" cycle SMART appends self-test log with new line:

Offline Interrupted (host reset) 10%

Manual Short/Extended tests have "Completed without error" status.

Device Model: INTEL SSDSC2BW240A4

Firmware Version: DC32

ATA Version is: 8

ATA Standard is: ACS-2

[rdaya2]

just try to get your receipt and go back to the store where you buy it and tell them it has a defect issue and try to ask the SHOP WARRANTY for replacement problem is done!!