How to configure the Intel P3608 PCIe SSD IN RAID? X99+Win8.1

[amash1]

Hello

i need help with my P3608 1.6TB RAID 0 setup.

so i have Asrock X99 WS-E

OS SSD M.2 is Samsung 250GB.

Win 8.1 / 10 - X64 Tried Both.

after Installing the latest drivers NVMe and the RSTe software

When entering the RSTe GUI software all i can see is my M.2 SSD

cant see my P3608 in wich i want to make a Raid 0 volume

[ASouz7]

Alopa,

Raid 0 works better if the SSDs are identical (same size and same write and read speeds) and if possible, start it with the drives blank/formatted. Raid controllers use SATA and SAS drives in most cases. You might want to consult the Forums for more information on Intel® Rapid Storage Technology.

[amash1]

Hi but the P3608 made of 2 identical drives

each around 750GB

2 SSD's on 1 PCB

like here.

http://www.pcper.com/reviews/Storage/Intel-DC-P3608-Series-16TB-NVMe-PCIe-SSD-Review-High-Density-En... http://www.pcper.com/reviews/Storage/Intel-DC-P3608-Series-16TB-NVMe-PCIe-SSD-Review-High-Density-En...

[ASouz7]

Alopa,

We are still investigating the RST with NVMe* on Intel® X99 Chipset. Please gives some time to check this for you.

[amash1]

i cant get it to work with Gigabyte Z170-HD3 either.

with new skyplake processors

In the RTSe GUI Utility i cant see the nvme chipset.

only sata controler with sata SSD

i see both disks in the device manager and the intel Solid-State Drive Toolbox