Hi Team.
On a DELL PowerEdge R630 server, with VMWare ESXi 7 (ESXi-7.0U3j-21053776-standard), with a PERC H730P Mini controller (LSI SAS 3108, driver lsi_mr3, v7.718.02.00-1vmw.703.0.20.19193900), I am unable to use of your CLI utility sst v1.5 and/or v1.6 to upload new firmware to SSD drives.
There are two SSD drives in the server - Intel S4510 (SSDSC2KB960G8) in RAID1.
The utility does not see SSD drives.
After command ESXi bash:
./sst show -ssd
No results
I tried the command:
./sst set -system EnableLSIAdapter=true
Syntax Error: Invalid command. Error at or around '='.
Even if I changed/edited the sst_config.xml file and changed "EnableLSIAdapter" from "false" to "true" in it, the same result - the sst utility does not see SSDs.
perccli displays information about SSD drives:
PDs for VD 0 :
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp Type -------------------------------------------------- ------------------------------
32:0 0 Onln 2 893.750 GB SATA SSD N N 512B INTEL SSDSC2KB960G8 U
32:1 1 Onln 2 893.750 GB SATA SSD N N 512B INTEL SSDSC2KB960G8 U -------------------------------------------------- ------------------------------
Please help how to upload new firmware to SSD in ESXi 7 on PERC H730P Mini controller using CLI and sst. Thank you
#S4500 #S4510 #SSDSC2KB960G #R630 #H730
