Archive
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Is Intel SSD Toolbox working ok?

Hi,I have installed Intel's new SSD Toolbox on my laptop with Windows 7 64bit and a X-25M 160gb hard disc partitioned 60/100gb. All is working fine on the laptop but when I launch the toolbox it sees the two partitioned drives but has them both confi...

idata by Esteemed Contributor III
  • 1351 Views
  • 0 replies
  • 0 kudos

How do I prevent further damage after flashing the firmware?

Hi,I flashed the new firmware to my 80GB G2 drive in AHCI mode. Did the reboot after Windows 7 Final (x64) installed new driver (Intel Matrix Storage Manager is present). Installed SSD Toolbox and ran optimization once. And, no, I did not get the err...

idata by Esteemed Contributor III
  • 4695 Views
  • 13 replies
  • 1 kudos

80GB SSD Back from the DEAD

Like many others, my Intel 80GB SSD was trashed yesterday by the firmware update. I am now back running Win7 64 on my SSD, as I write this post. In the hopes of helping someone else, here's my story:Yesterday, I installed the TRIM update on my SSD. T...

idata by Esteemed Contributor III
  • 3812 Views
  • 12 replies
  • 0 kudos

'This drive is not Intel SSD' firmware update issue

I have two X-25M G2 80gb. I put one in a brand new system (Win7 x64) and the other I put in an existing system (also Win7 x64 on the SSD but dual booting with Vista x64 on a regular drive). The SSD I put in my new system is detected fine by the fir...

idata by Esteemed Contributor III
  • 3444 Views
  • 4 replies
  • 0 kudos

Firmware upgrade after windows installation

Sorry if it is a question already answered, but I cannot find it and having read all these posts on firmware upgrade problems, I just want to be sure.I just received my new x25-m g2 80 GB and I don't want to upgrade firmware until Intel comes out wit...

idata by Esteemed Contributor III
  • 4082 Views
  • 6 replies
  • 0 kudos