https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21229#M9342 <P>Perfect! Thanks for the answer. I'm surprised I couldn't find a publicly-facing technical document with this information.</P> Wed, 01 Feb 2017 01:47:17 GMT JJime7 2017-02-01T01:47:17Z https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21226#M9339 <P>There are three status LEDs on the P3520 near the PCIe bracket. What do the LEDs indicate?</P><P></P><P>On one installation, I see the top and middle LEDs as green. On another installation in a different server, the top LED is green, and the middle LED is amber.</P><P></P><P>There is an installation guide for the P3500/P3600/P3700 series, but those have four status LEDs, so these would be different.</P> Mon, 30 Jan 2017 17:49:57 GMT https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21226#M9339 JJime7 2017-01-30T17:49:57Z https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21227#M9340 <P>Hello jfrjimenez,</P>We do not currently have the Add-in Card LED decoder information for the P3520 Series on hand but have already placed a request on your behalf. We will update you as soon as we receive a response.Best regards,Carlos A. Mon, 30 Jan 2017 22:50:59 GMT https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21227#M9340 idata 2017-01-30T22:50:59Z https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21228#M9341 <P>Hello jfrjimenez,</P>This is the information on the LEDs for your SSD.LED D103 (Top) - Shows green when there's IO activity.LED D102 (Middle) - Shows green when PCIe* link is good. Amber when the link is sub-optimal (running at Gen 1 or Gen 2, or less than 4 lanes).LED D101 (Bottom) - Health indicator. Off is good, amber indicates fail status.The Intel® SSD DC P3520 Series is a PCIe* NVMe* 3.0 x4. While the drive is backward compatible with PCIe* 2.0 and 1.0, the drive will perform at half or quarter speeds, respectively.Our recommendation, in this case, will be to make sure the drive in question has been installed into a slot that meets these requirements. It may also be good to check and make sure the slot doesn't share lanes with another device.Best regards,Carlos A. Tue, 31 Jan 2017 17:07:15 GMT https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21228#M9341 idata 2017-01-31T17:07:15Z https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21229#M9342 <P>Perfect! Thanks for the answer. I'm surprised I couldn't find a publicly-facing technical document with this information.</P> Wed, 01 Feb 2017 01:47:17 GMT https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21229#M9342 JJime7 2017-02-01T01:47:17Z https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21230#M9343 <P>Hello jfrjimenez,</P>You're welcome. We're always glad to be of assistance.Best regards,Carlos A. Wed, 01 Feb 2017 15:23:51 GMT https://community.solidigm.com/t5/solid-state-drives-nand/status-leds-on-p3520-hhhl-aic/m-p/21230#M9343 idata 2017-02-01T15:23:51Z