https://community.solidigm.com/t5/solid-state-drives-nand/can-t-get-data-migration-software-to-work-for-two-new-intel-ssd/m-p/21188#M9301 <P>Today I purchased a <B>Intel SSD 520 Series 180GB</B> drive to replace my <B>Intel SSD 330 120GB</B> drive. Both are connected to the <B>Intel SATA-3 Controller</B> on my <B>Asus Sabertooth X79</B> motherboard. The <B><I>Data Migration Software does not recognize the drives as genuine Intel</I></B> and my only option is to cancel the installation. Why? I have tried running the setup in compability-mode.</P> Wed, 23 Jan 2013 21:14:11 GMT idata 2013-01-23T21:14:11Z https://community.solidigm.com/t5/solid-state-drives-nand/can-t-get-data-migration-software-to-work-for-two-new-intel-ssd/m-p/21188#M9301 <P>Today I purchased a <B>Intel SSD 520 Series 180GB</B> drive to replace my <B>Intel SSD 330 120GB</B> drive. Both are connected to the <B>Intel SATA-3 Controller</B> on my <B>Asus Sabertooth X79</B> motherboard. The <B><I>Data Migration Software does not recognize the drives as genuine Intel</I></B> and my only option is to cancel the installation. Why? I have tried running the setup in compability-mode.</P> Wed, 23 Jan 2013 21:14:11 GMT https://community.solidigm.com/t5/solid-state-drives-nand/can-t-get-data-migration-software-to-work-for-two-new-intel-ssd/m-p/21188#M9301 idata 2013-01-23T21:14:11Z https://community.solidigm.com/t5/solid-state-drives-nand/can-t-get-data-migration-software-to-work-for-two-new-intel-ssd/m-p/21189#M9302 <P>Does the drive show up in the device manager under "Disk drives" as something starting with the text string "INTEL" followed by an alphanumeric product ID? The data migration software checks the device ID to determine if the destination drive is an Intel product.</P> Sat, 26 Jan 2013 22:44:33 GMT https://community.solidigm.com/t5/solid-state-drives-nand/can-t-get-data-migration-software-to-work-for-two-new-intel-ssd/m-p/21189#M9302 UHans 2013-01-26T22:44:33Z